The first step to changing your Smith goggle lens is knowing which goggles you have: I/O Mag, I/O, Skyline, or a Squad / full-frame model.
For Smith I/O Mag Goggles, watch the Smith I/O Mag Goggles lens change video or follow the instructions below.
Smith I/O Mag lens removal: Lens removal works from either side of the lens.
1. Locate the latch behind the strap outrigger.
2. Find the tabs on the end of the lens.
3. Push the latch down towards the frame.
4. Pull and remove the lens.
Smith I/O Mag lens installation: Lens installation works from either side of the lens.
1. Locate the tabs on the back of the lens.
2. Guide the lens tab into the end of the goggle frame
3. Apply light pressure, and snap the lens into place
For Smith I/O Goggles, watch the Smith I/O Goggles lens change video or follow the instructions below.
Smith I/O lens removal:
1. Unlock the brow levers by flipping them up and away from the lens.
2. Pull the top of the frame up and away from the lens.
3. Rotate the lens forward to clear the outriggers on each side of the frame.
4. Pull to remove lens from nose of the frame.
Smith I/O lens installation:
1. Pinch the nose of the frame together.
2. Center the lens into the nose groove.
3. Insert the dovetails at each side of the lens.
4. Guide the lens into the frame and behind each of the outriggers.
5. Reinsert the lens into top of the frame, and lock the brow levers into place over the lens.
For Smith Skyline Goggles, watch the Smith Skyline Goggles lens change video or follow the instructions below.
Smith Skyline lens removal:
1. Put one hand on the nose of the frame and one hand under the top of the frame
2. Apply pressure, and release the lens at the top.
2. Pull to remove lens from the rest of the frame.
Smith Skyline lens installation:
1. Align taps at nose of lens with grooves in frame.
2. Apply pressure at the nose until you hear lens click into place.
3. Align lens ring tabs with side of frame.
4. Locate the three tabs on the top of the lens frame, align with lens, and apply pressure until frame clicks into place.
For Smith Squad and full-frame goggles, follow the instructions below.
Smith Squad and full-frame goggle lens removal:
1. Start by carefully separating the frame from the lens at the brow.
2. Work around the perimeter of the frame to continue separating lens until free.
Smith Squad and full-frame goggle lens installation:
1. Pinch the nose of the frame together.
2. Center the lens into the nose groove.
3. Push the lens fully into place at the nose.
4. Guide the lens into place along the cheeks and into the sides.
5. Finish by pressing the top of frame firmly into place across the brow of the lens.